Ανταλλακτικα

Contains one brake pad pair plus holders

FSA JIS Crank Bolts.

Features:

8mm CrMo bolt for JIS 2-degree square taper crank, sold in pairs

Self-extracting bolts: includes puller cap that threads into most crank arms. 72g/pr

Non-extracting bolts: 8mm hex fitting, 70g/pr

Specs:

Fits: JIS (self-extracting)

Bolt Size: M8

FSA Crank Arm Fixing Bolts

Requires 8mm hex wrench, includes washers

FSA Torx T30 chainring bolt set made of cold forged 7075-T6 aluminum. Suitable for FSA K-Force Light 386 3-Arm 2-speed cranks. Incl. tool.

Material: aluminium

The FSA Carbon SL Headset Spacer is a super light carbon spacer for tuning stem height on 1-1/8" steerer tubes. Spacers are internally weight relieved to drop a few extra gram and logo branded on the exterior.

160-4326
H2373

Campagnolo Veloce Ultra-Drive Sprockets
10 speed 13-26T

Campagnolo Chorus QS Front Derailleur
9s/10s
Braze On
Aluminium

Campagnolo EC-AT401C left hand Athena 11 speed ergo bodies with composite gear paddle for 2015 for double chainsets. No brake lever but all gear shifting internals present.

Also for post 2015 veloce left hand ergo. 

This body has the new style thumb shifter.

Bottom bracket cups for the installation of Campagnolo and Fulcrum Ultra Torque cranksets at frames with oversize bottom bracket shells. These specific adapters are made of aluminium and have the same bearing seat function as the already renowned Ultra Torque threaded cups. The adapters simply replace the standard cups on frames with oversize bottom bracket shells. The adapters are about 20 grams lighter than standard cups.

Pressfit bottom bracket BB92 for FSA aluminium cranks with 19 mm axle (e.g. Gamma Drive, Omega).

BB92 Bottom Bracket for carbon SL-K MTB cranksets.

Bottom brackets from FSA for non-threaded applications.Item compatible with 2008 and newer "Light"cranks (I.E.: SL-K Light, K-Force light)For use with Arc Spline FSA cranksCompatible with pre 2008 FSA cranks when used with 2 wave washers (QBP part # CR3794) on the non-drive sideFor use with older FSA square spline cranks use 2 FSA wave washers (CR3794) on the non-drive side

Bottom bracket BB-ALM92/CZ mtb BB92 24mm cr-mo steel

386EVO crank into a PF30 or BB30 frame

200-3204
MW258A Washer Anodized Black